Use - Terasic Cyclone V GX Starter Kit

Connecting

The 20-pin way

This looks like :

The 40-pin way

This looks like :

Programming

The 20-pin and 40-pin programming files are named 'ter_20' and 'ter_40' respectively, and can be found in this directory.

This is release 3 (07 Feb 2021).

Using

The available processor clock frequencies are 1 through 80 MHz. The available RAM is 512 KB.

And note that :

• The segment display on the development board always reflects the current clock speed.
• Switch SW0 on the development board can be used to enable (switch 'up') or disable (switch 'down') the Second Processor.